Resources:
Cut Sheet
User Manual
CAD Drawings 16 zone .dwg
CAD Drawings 16 zone .pdf
CAD Drawings 32 zone .dwg
CAD Drawings 32 zone .pdf
Physical Specifications:
Durable housing and waterproof epoxy construction
Width: 12 1/4" (31.0 cm)
Height: 10" (26.0 cm)
Depth: 5 7/8" (5.0 cm)
Model:
ACC-ADP-016, 16 Zones
ACC-ADP-032, 32 Zones
| Home > Products > Controllers > 16/32 Zone Adapters
16/32 Zone Adapters
For Retrofit Installations of the 2-Wire System
Acclima 16 and 32-zone adapters are used to connect 24 volt ac valves and relays to the Acclima 2 wire system. They are designed to be installed above ground either indoors or outdoors. The adapters are wired to the Acclima CS3500 controller through the Acclima 2-wire system. The 16 or 32 terminals in the adapter boxes can accommodate connections to either 16 or 32 solenoid valves. These adapters are normally used in retrofit installations where the zone wiring is already in place.
Installation:
16/32 Zone Adapters are installed in place of an existing controller to bridge the gap between the Acclima 2-Wire system and the existing conventionally wired system.
Features:
- Durable, weather resistant, lockable cabinet for outdoor installation
- Retrofit design, replaces existing controller and communicates with new Acclima controller of 2-Wire system
- Easy installation
- LEDs report active valves
- LEDs report communications activity on the 2-Wire system
Specifications
- 24 VAC, 20 ma rms, .48 watts
- Operating Temperature Range: -20C to 70C
- Survival Temperature Range: -40C to 85C